Hierarchically structured ternary heterojunctions based on Ce3+/ Ce4+ modified Fe3O4 nanoparticles anchored onto graphene oxide sheets as magnetic visible-light-active photocatalysts for decontamination of oxytetracycline

Authors:

Keywords

Magnetic nanocomposite
Modification
Oxytetracycline
Photocatalysis
Visible-light activation

Abstract

A high density 10 wt% ZrB2 and 1 wt%. CNT-reinforced mullite-based composite was prepared by spark plasma sintering (SPS) at temperature of 1350 °C, average heating rate of 60 °C/min and a soaking time of 5 min. Under these conditions, the sintered composite obtained a high hardness (16.24 ± 0.12 GPa), fracture toughness (4.18 ± 0.51 MPa m1/2) and flexural strength (488 ± 21 MPa). The results of FESEM images showed a uniform distribution of the reinforcement particles in the composite. The resulting CNTs survived the sintering process and did not undergo any transformation. A transgranular fracture was predominantly observed in the fractured surface micrographs of the composite. The CNTs pullout and crack-bridging toughening mechanisms were also observed in the composite, which could have a significant contribution to the fracture energy and the interfacial adhesion.

We appreciate your valuable comments on this article

Leave a Comment:

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.

Lithium ion-selective membrane with 2D subnanometer channels

Articles

An investigation into the microstructure and mechanical properties of V2AlC MAX phase prepared by microwave sintering

Articles

Preparation of mullite-TiB2-CNTs hybrid composite through spark plasma sintering

Articles

Design and applications of MEMS flow sensors: A review

Articles
Lithium ion-selective membrane with 2D subnanometer channels
Effects of ZrB2 reinforcement on microstructure and mechanical properties of a spark plasma sintered mullite-CNT composite
Menu